Estimated Arrival: Between Jun 29 and Jul 04. *ETA to the USA Only
Shipping & Returns: Free Shipping. All The Time.
The RIVER Extra Battery is designed to integrate with RIVER 600 to increase the energy capacity of the unit. You can easily double the capacity of the RIVER 600 from 288Wh to 576Wh by attaching the RIVER 600 Extra Battery to the main model. *RIVER Power Station not included,*
- RECHARGE FROM 0% TO 80% WITHIN 1 HOUR - With the EcoFlow patented X-Stream Technology, the smart inverter enables a fast rechargeability that takes less than 1 hour to charge from 0%-80%, and it gets fully charged in 1.6 hours. You can switch to a quieter charging condition by turning on the “Quiet Charging” status on the APP.
- COMPATIBLE WITH 80% of HOME APPLIANCES - The X-Boost Technology’s advanced built-in algorithm enables most heavy-duty kitchen appliances and tools (up to 1800W) to operate. With X-Boost, RIVER 600 Max can power 80% of essential home appliances and devices, especially those within 1200W for better using experience. The discharging rates and X-Boost mode can be monitored and controlled through the EcoFlow APP.
- 24 MONTHS WARRANTY - EcoFlow offers a 24*7 friendly customer service, and a 24 months product warranty. What’s in the box: 1* RIVER 600 Extra Battery, 4* Long Screws, 1* Cross Screw Driver, 1*User Guide.
- Please make sure that the RIVER 600 is off. Then take out the screwdriver from the extra battery module kit, and locate the four screws on the bottom cover. Note: Please pay attention, and avoid the static electricity during the installation process.
- Remove the 4 screws on the bottom cover. The extra battery module should be positioned as shown in the figure.
- Align the male and female battery sockets, and connect them. Close the bottom cover. Take the four long screws from the kit and screw them on the screw mouth.
- Put the RIVER 600 upright and turn it on. The extra battery’s ambient light will turn on. On the RIVER 600’s display, if the extra battery module indicator light is on, then it is activated successfully. If the ambient light or the extra battery module indicator light is not on, repeat the installation steps, and then check the connection.
What’s in the box
- 1* RIVER 600 Extra Battery
- 4* Long Screws
- 1* Cross Screw Driver
- 1*User Guide